LMI Milton Roy C111-368SI Series C Metering Pump, 2.5 GPH @ 150 PSI, 115 VAC

Description

This Listing is for a
LMI Milton Roy C111-368SI Series C Metering Pump, 2.5 GPH @ 150 PSI, 115 VAC New
What this includes:
LMI Milton Roy C111-368SI Series C Metering Pump, 2.5 GPH @ 150 PSI, 115 VAC New
Description:
This is a LMI Milton Roy C111-368SI Series C Metering Pump, 2.5 GPH @ 150 PSI, 115 VAC New. This is my item 7599.  This pump is new.  However, there are no accessories with this pump.
More Information:
LMI Series C Metering Pump.
2.5 GPH @ 150 PSI, Liquid End 368SI, 115 VAC 50/60 Hz, US Plug.
Dual Manual Control
Stroke frequency and stroke length are manually adjustable.
General Description
LMI Series C chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 44 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 20 lbs (9.1 kg).
Pressure Relief
To eliminate need for pressure relief valve, Liquifram shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic with a glass fiber reinforced polypropylene EPU carrier. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve, Tubing, Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections).
Brand:
LMI
Product:
Pumps
Type:
Metering Pump, Diaphragm, Solenoid
Product Line:
LMI Series C
Max. Flow (GPH):
2.50
Max. Flow (GPD):
60.00
Max. Pressure (PSI):
150
Max. Viscosity (cps):
400
Max. Strokes per Minute:
100
Flow Control:
Dual Manual Control
Turn Down Ratio:
1000:1
Head / Fittings:
Molded PVC / PVC
Valve Balls:
.375 Ceramic
Diaphragm:
Fluorofilm
Valve / Seat / O-ring:
PVDF/ Polyprel
Connections:
Tubing PE .375" O.D.
Power Supply:
115 VAC 50/60 Hz, US Plug
Please use the shipping calculator to determine shipping.
See my
other items
where I have many other Rotors, Rotor Accessories, and other scientific equipment.
If you receive your item and it is not to your 100 Percent Satisfaction,
please contact us before leaving feedback.  I strive to make sure every transaction is a positive one!
I wanted to reach out and let you know that eBay is changing the way Sellers are rated.  I am not overjoyed with what's happening, but I have to roll with it.  IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me.  Please don't open a case.  Cases count against me even if they are resolved. I stand behind my items and will work out any problems that you may have with an item.  So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication
.
International Buyers, Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight
(shipping) company or when you pick the item up do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as "gifts".
US and International government regulations prohibit such behavior.