LMI Metering Pump SG63J8P 147 GPH, 100 psi, PVC, Manual Control 230/460 3 Phase

Description

LMI Series G Metering Pump.
147 GPH @ 100 PSI, PVC Liquid End (ETL Certified to conform to ANSI/NSF STD 50).
230/460 VAC, 60 Hz, 3 Phase.
Manual Stroke Length Control
Manually adjustable eccentric stroke length control, stroke frequency is fixed.
General Description
LMI Series G chemical metering pumps shall be motor driven mechanically actuated positive displacement diaphragm type pumps. Precision stroke adjustment can be operated while the pump is running or stopped from zero to maximum capacity.
Pump Controls
The stroke frequency will be fixed. Stroke length shall be adjustable by a readily accessible dial knob located ajacent to the liquid handling end.
Drive Assembly
A robust metallic, worm gear drive coupled with the industrial duty variable eccentric stroke adjustment mechanism yields a 10 to 1 turn down ratio. All gear components operate in an oil bath for long life.
Materials of Construction
See Specifications tab. Chemical metering pump housing is a durable, metallic housing designed to withstand tough environments. All exposed fasteners shall be stainless steel. Valves shall be serviceable by replacing the cartridge valve assembly.
WARNING: A pressure relief valve MUST be installed in the discharge line of all motor driven pump (order as a separate line item).
THIS PUMP RETAILS FOR OVER ,500.00!!!
FOUND ELSEWHERE FOR OVER ,000.00!!!
You won't find a better price on this ANYWHERE!
SAVE BIG
***Can supply single phase 115/230V motor if needed (same price)
not what you are looking for? check out my other listings...