Lab Hot Plate Magnetic Stirrer Mixer,Knobs and Buttons,Temperature Control

Description

实验室磁加热搅拌器
特征
●搅拌功能
磁力搅拌器由位于工作盘下方的永磁体驱动，永磁体可以穿透工作盘表面，磁铁直接固定在电机的转轴上。
仪器的实际速度取决于实际负载和电压。
允许范围内的电压波动和被处理介质粘度的变化都会引起速度的波动。
电机转速可根据实验要求调节。
●加热功能
The general heating magnetic stirrer is equipped with a heating device on the chassis. In addition, a corresponding device is also set to monitor the heating. The working plate will be equipped with a temperature sensor (hot spot coupling). The instrument will not heat the medium. The temperature is adjusted.
Safe to use
● It cannot be used to stir explosive materials in dangerous environments or operate the instrument underwater.
●
It should be ensured that only personnel with relevant training can use the instrument.
●
Take care to prevent the instrument power cord from touching the chassis.
●
Wear appropriate protective equipment according to the type of medium to be processed.
●
The instrument cannot be used for indoor treatment of explosive dangerous media. The instrument should be placed on a non-flammable or fireproof table.
●
Pay attention to the magnetic field! It is necessary to consider the influence of the magnetic field on the surrounding environment, such as data storage and cardiac pacemakers.
●
Watch out for high temperatures! The surface temperature of the instrument can reach hundreds of degrees Celsius when it is working. Be careful of burns when touching the casing and the surface of the instrument. After the instrument is turned off, pay attention to residual heat.
●
When heating and cooling, a slight sound may be emitted due to the expansion of the material.
Package
●1*Power Cord
●1*Stirrer Bar
●1*Spare Fuse
●1*支架(HSC-19T)
●1*温度探头(HSC-19T)