Chemical injection pump SEKO AML 200 0.8 GPH max @ 145 psi with PVDF liquid end

Description

Simplify
Wet Materials:
EPDM,
PTFE and PVDF (Check compatibility
)
Max Pressure: 145
psi
Max Flow Rate:
Adj. from 0 to 1.3 GPH (@ 120 psi)
Power:  110 VAC and 220 VAC, or 24 VDC
Control:
Manual
Pump Type: Diaphragm
Box contains: complete pump, injection valve, foot valve and 6 ft (each)  of suction and discharge tubing. Wall mounting bracket and floor stand.
Simplify
is our way of making it easier for you to decide if this is the correct chemical injection pump for you. Make sure the wet materials are compatible with the chemical (use compatibility chart
), the pump can achieve the maximum pressure and flow rate, it can use the power source available and, the control is the one you need for your application. Anything else is "bells and whistle"
MORE INFO
Seko S.p.a is a global pump manufacturer founded in 1978. Based in Italy they have manufacturing facilities and offices in all continents and sub-continents, and ship to over 120 countries. With a smart design, the AML200 is the right chemical injection pump to reliably feed chemicals into a system. With a PTFE diaphragm capable of outlasting any other diaphragm in the market, and a PVDF liquid end compatible to most chemicals in the market, it is built to last in any application.
Capable of feeding up to 0.8 GPH at 145 psi, this pump can be manually adjusted to feed consistently the correct amount every single time. It is shipped with all the components so it can quickly be installed and start operation, out of the box. The unique suction foot valve, using a diaphragm valve and not a check valve, allows for continuous operation without losing prime due to the valve's orientation. Ready to be installed on a wall, panel or the floor, it can easily be operated and maintained.
We worship quality and reliability over bells and whistles. Try it out, and you will be converted!
Check your chemicals compatibility with PTFE and PVDF
MATERIALS
MATERIALS USED IN THE PUMP HEAD
BODY PVC
BALL VALVES Ceramic
SEAT VALVE FPM/EPDM
DIAPHRAGM FULL PTFE
The parts in contact with the liquid have been chosen in order
to guarantee perfect compatibility with most chemical
normally in use.
Check your chemical's material compatibility
!
WARRANTY
These valves have a 24 months warranty on manufacturing defects! also:
We offer a 30-day money back guarantee on all products that have been purchased from us directly. All items must be returned as new in their original packaging, including all accessories and cables. Missing items will be charged based on suggested retail prices. All returns must be accompanied by a valid return authorization number (RMA) issued by us. If an RMA is not obtained prior to shipping, the returned product will be refused and returned to sender. Shipping cost is not refundable and returns must be shipped prepaid by the customer. To set up a return for refund please email
. Please be sure to include your order # and reason for returning in your email.
FEATURES
FLOW RATES      120 p.s.i. @ 1.3 GPH  or 145 p.s.i. @ 0.8 GPH
POWER SUPPLY 100÷240 Vac 50/60 Hz (*)
STROKE RATE 160 strokes/minute
ENCLOSURE PP protection degree IP65
INSTALLATION KIT in PP included
Constant flow rate manually adjustable by control dial on the front panel, two
flow rate range:
l 0÷20% with switch in P position,
l 0÷100% with switch in C position,
Power-ON led indicator and level control input.